Default Password for Zhone ZNID-GPON-2426A-1MB Router

To get access to Zhone ZNID-GPON-2426A-1MB router, you need the login IP address of your router, the username, and password.

You can find these information in Zhone ZNID-GPON-2426A-1MB router manual. But if you lost it, then you can use the quick guide below.

Login to the Zhone ZNID-GPON-2426A-1MB Router

The Zhone ZNID-GPON-2426A-1MB has a web interface for configuration. You can use any web browser to log in to the Zhone ZNID-GPON-2426A-1MB router.

Put the Login IP Address of your Zhone ZNID-GPON-2426A-1MB in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Zhone ZNID-GPON-2426A-1MB login infomation.

Default login data for Zhone ZNID-GPON-2426A-1MB

You need to know the username and password to log in to your Zhone ZNID-GPON-2426A-1MB router. We listed below.

Model Ip Username & Password
Zhone ZNID-GPON-2426A-1MB Username:user/ Password:user

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Zhone ZNID-GPON-2426A-1MB Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of Zhone ZNID-GPON-2426A-1MB Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Zhone ZNID-GPON-2426A-1MB router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Zhone ZNID-GPON-2426A-1MB Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its factory settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change Zhone ZNID-GPON-2426A-1MB Default Wifi Name (SSID)

By default, some Zhone ZNID-GPON-2426A-1MB routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Zhone ZNID-GPON-2426A-1MB

MAC filtering allows you to restrict access to your Zhone ZNID-GPON-2426A-1MB router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Zhone ZNID-GPON-2426A-1MB router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for Zhone ZNID-GPON-2426A-1MB router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

three × three =