Default Password for Zoom X5 5654A Router

To get access to Zoom X5 5654A router, you need the login IP address of your router, the username, and password.

You can find these info in Zoom X5 5654A router manual. But if you lost it, then you can use the quick guide below.

Login to the Zoom X5 5654A Router

The Zoom X5 5654A has a web interface for configuration. You can use any web browser to log in to the Zoom X5 5654A router.

Put the Internal IP Address of your Zoom X5 5654A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your Zoom X5 5654A login username & password.

Default login data for Zoom X5 5654A

You need to know the username and password to log in to your Zoom X5 5654A router. We listed below.

Model Ip Username & Password
Zoom X5 5654A 10.0.0.2 Username:admin/ Password:zoomadsl

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other Zoom X5 5654A Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of Zoom X5 5654A Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to Zoom X5 5654A router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the Zoom X5 5654A Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change Zoom X5 5654A Default Wifi Name (SSID)

By default, some Zoom X5 5654A routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for Zoom X5 5654A

MAC filtering allows you to restrict access to your Zoom X5 5654A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your Zoom X5 5654A router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 10.0.0.2 on the address.
  2. Enter the username and password for Zoom X5 5654A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

1 × five =