Default Password for ZTE MF29A Router

To get access to ZTE MF29A router, you need the login IP address of your router, the username, and password.

You can find these info in ZTE MF29A router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZTE MF29A Router

The ZTE MF29A has a web interface for configuration. You can use any web browser to log in to the ZTE MF29A router.

Put the Internal IP Address of your ZTE MF29A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE MF29A login infomation.

Default login data for ZTE MF29A

You need to know the username and password to log in to your ZTE MF29A router. We listed below.

Model Ip Username & Password
ZTE MF29A 192.168.0.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZTE MF29A Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of ZTE MF29A Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to ZTE MF29A router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the ZTE MF29A Router To Default Settings?

If you still can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change ZTE MF29A Default Wifi Name (SSID)

By default, some ZTE MF29A routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZTE MF29A

MAC filtering allows you to restrict access to your ZTE MF29A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE MF29A router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for ZTE MF29A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

  1. While I searched all over the world for the default password of this damn router, I find it here.

Leave a comment

Your email address will not be published.

three × 2 =