Default Password for ZTE MF65 Router

To get access to ZTE MF65 router, you need the login IP address of your router, the username, and password.

You can find these info in ZTE MF65 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the ZTE MF65 Router

The ZTE MF65 has a web interface for configuration. You can use any web browser to log in to the ZTE MF65 router.

Put the Internal IP Address of your ZTE MF65 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE MF65 login data.

Default login data for ZTE MF65

You need to know the username and password to log in to your ZTE MF65 router. We listed below.

Model Ip Username & Password
ZTE MF65 192.168.1.1 Username:(none)/ Password:smartbro

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZTE MF65 Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of ZTE MF65 Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to ZTE MF65 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the ZTE MF65 Router To Default Settings?

If you can not login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change ZTE MF65 Default Wifi Name (SSID)

By default, some ZTE MF65 routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZTE MF65

MAC filtering allows you to restrict access to your ZTE MF65 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE MF65 router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for ZTE MF65 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

13 + 2 =