Default Password for ZTE Z288L Router

To get access to ZTE Z288L router, you need the login IP address of your router, the username, and password.

You can find these data in ZTE Z288L router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZTE Z288L Router

The ZTE Z288L has a web interface for configuration. You can use any web browser to log in to the ZTE Z288L router.

Put the IP Address(without “http://” or “https://”) of your ZTE Z288L in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE Z288L login infomation.

Default login data for ZTE Z288L

You need to know the username and password to log in to your ZTE Z288L router. We listed below.

Model Ip Username & Password
ZTE Z288L 192.168.0.1 Username:admin/ Password:printed on router

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZTE Z288L Login Problems

If you not be able to get a login to your router, here are a few possible solutions you can try.

The Password of ZTE Z288L Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to ZTE Z288L router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the ZTE Z288L Router To Default Settings?

If you still can not get logged in, then you are probably going to reset your router to its factory settings.

To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.

Change ZTE Z288L Default Wifi Name (SSID)

By default, some ZTE Z288L routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZTE Z288L

MAC filtering allows you to restrict access to your ZTE Z288L router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE Z288L router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.0.1 on the address.
  2. Enter the username and password for ZTE Z288L router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

nineteen − 13 =