Default Password for ZTE ZXHN H108L Router

To get access to ZTE ZXHN H108L router, you need the login IP address of your router, the username, and password.

You can find these information in ZTE ZXHN H108L router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZTE ZXHN H108L Router

The ZTE ZXHN H108L has a web interface for configuration. You can use any web browser to log in to the ZTE ZXHN H108L router.

Put the Internal IP Address of your ZTE ZXHN H108L in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE ZXHN H108L login infomation.

Default login data for ZTE ZXHN H108L

You need to know the username and password to log in to your ZTE ZXHN H108L router. We listed below.

Model Ip Username & Password
ZTE ZXHN H108L 192.168.1.1 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZTE ZXHN H108L Login Problems

If you can not get a login to your router, here are some possible solutions you can try.

The Password of ZTE ZXHN H108L Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to ZTE ZXHN H108L router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the ZTE ZXHN H108L Router To Default Settings?

If you can’t login the setup page of router, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.

Change ZTE ZXHN H108L Default Wifi Name (SSID)

By default, some ZTE ZXHN H108L routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZTE ZXHN H108L

MAC filtering allows you to restrict access to your ZTE ZXHN H108L router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE ZXHN H108L router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for ZTE ZXHN H108L router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

fifteen + seventeen =