To get access to ZTE ZXHN H298N router, you need the login IP address of your router, the username, and password.
You can find these data in ZTE ZXHN H298N router manual. But if you lost it, then you can use the quick guide below.
Login to the ZTE ZXHN H298N Router
The ZTE ZXHN H298N has a web interface for configuration. You can use any web browser to log in to the ZTE ZXHN H298N router.
Put the Internal IP Address of your ZTE ZXHN H298N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE ZXHN H298N login data.
Default login data for ZTE ZXHN H298N
You need to know the username and password to log in to your ZTE ZXHN H298N router. We listed below.
|Model||Ip||Username & Password|
|ZTE ZXHN H298N||192.168.1.1||Username:user/ Password:user|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZTE ZXHN H298N Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of ZTE ZXHN H298N Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to ZTE ZXHN H298N router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the ZTE ZXHN H298N Router To Default Settings?
If you can’t access the router’s setup page, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change ZTE ZXHN H298N Default Wifi Name (SSID)
By default, some ZTE ZXHN H298N routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZTE ZXHN H298N
MAC filtering allows you to restrict access to your ZTE ZXHN H298N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE ZXHN H298N router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for ZTE ZXHN H298N router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.