Default Password for ZTE ZXV10 H201L Router

To get access to ZTE ZXV10 H201L router, you need the login IP address of your router, the username, and password.

You can find these info in ZTE ZXV10 H201L router manual. But if you lost it, then you can use the quick guide below.

Login to the ZTE ZXV10 H201L Router

The ZTE ZXV10 H201L has a web interface for configuration. You can use any web browser to log in to the ZTE ZXV10 H201L router.

Put the Login IP Address of your ZTE ZXV10 H201L in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZTE ZXV10 H201L login username & password.

Default login data for ZTE ZXV10 H201L

You need to know the username and password to log in to your ZTE ZXV10 H201L router. We listed below.

Model Ip Username & Password
ZTE ZXV10 H201L 192.168.1.254 Username:admin/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZTE ZXV10 H201L Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of ZTE ZXV10 H201L Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to ZTE ZXV10 H201L router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.

How to Reset the ZTE ZXV10 H201L Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change ZTE ZXV10 H201L Default Wifi Name (SSID)

By default, some ZTE ZXV10 H201L routers have network names (with the manufacturer name). We recommend using a special name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZTE ZXV10 H201L

MAC filtering allows you to restrict access to your ZTE ZXV10 H201L router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZTE ZXV10 H201L router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.254 on the address.
  2. Enter the username and password for ZTE ZXV10 H201L router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

7 + five =