Default Password for ZyXEL DEL1201-T10A Router

To get access to ZyXEL DEL1201-T10A router, you need the login IP address of your router, the username, and password.

You can find these data in ZyXEL DEL1201-T10A router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZyXEL DEL1201-T10A Router

The ZyXEL DEL1201-T10A has a web interface for configuration. You can use any web browser to log in to the ZyXEL DEL1201-T10A router.

Put the IP Address(without “http://” or “https://”) of your ZyXEL DEL1201-T10A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL DEL1201-T10A login username & password.

Default login data for ZyXEL DEL1201-T10A

You need to know the username and password to log in to your ZyXEL DEL1201-T10A router. We listed below.

Model Ip Username & Password
ZyXEL DEL1201-T10A 192.168.1.1 Username:(none)/ Password:admin

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL DEL1201-T10A Login Problems

If you can’t get a login to your router, here are a few possible solutions you can try.

The Password of ZyXEL DEL1201-T10A Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to ZyXEL DEL1201-T10A router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.

How to Reset the ZyXEL DEL1201-T10A Router To Default Settings?

If you can’t access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change ZyXEL DEL1201-T10A Default Wifi Name (SSID)

By default, some ZyXEL DEL1201-T10A routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL DEL1201-T10A

MAC filtering allows you to restrict access to your ZyXEL DEL1201-T10A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL DEL1201-T10A router. Be sure to update this information when adding devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 on the address.
  2. Enter the username and password for ZyXEL DEL1201-T10A router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

twenty − ten =