To get access to ZyXEL P-2612HNU-F1F PLDT router, you need the login IP address of your router, the username, and password.
You can find these data in ZyXEL P-2612HNU-F1F PLDT router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the ZyXEL P-2612HNU-F1F PLDT Router
The ZyXEL P-2612HNU-F1F PLDT has a web interface for configuration. You can use any web browser to log in to the ZyXEL P-2612HNU-F1F PLDT router.
Put the IP Address(without “http://” or “https://”) of your ZyXEL P-2612HNU-F1F PLDT in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL P-2612HNU-F1F PLDT login username & password.
Default login data for ZyXEL P-2612HNU-F1F PLDT
You need to know the username and password to log in to your ZyXEL P-2612HNU-F1F PLDT router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL P-2612HNU-F1F PLDT||192.168.1.1||Username:adminpldt/ Password:1234567890|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL P-2612HNU-F1F PLDT Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of ZyXEL P-2612HNU-F1F PLDT Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to ZyXEL P-2612HNU-F1F PLDT router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the ZyXEL P-2612HNU-F1F PLDT Router To Default Settings?
If you still can not login the setup page of router, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL P-2612HNU-F1F PLDT Default Wifi Name (SSID)
By default, some ZyXEL P-2612HNU-F1F PLDT routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL P-2612HNU-F1F PLDT
MAC filtering allows you to restrict access to your ZyXEL P-2612HNU-F1F PLDT router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL P-2612HNU-F1F PLDT router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for ZyXEL P-2612HNU-F1F PLDT router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.