To get access to ZyXEL P 660 RT 1 v3s router, you need the login IP address of your router, the username, and password.
You can find these data in ZyXEL P 660 RT 1 v3s router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the ZyXEL P 660 RT 1 v3s Router
The ZyXEL P 660 RT 1 v3s has a web interface for configuration. You can use any web browser to log in to the ZyXEL P 660 RT 1 v3s router.
Put the Login IP Address of your ZyXEL P 660 RT 1 v3s in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL P 660 RT 1 v3s login infomation.
Default login data for ZyXEL P 660 RT 1 v3s
You need to know the username and password to log in to your ZyXEL P 660 RT 1 v3s router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL P 660 RT 1 v3s||192.168.1.1||Username:admin/ Password:1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL P 660 RT 1 v3s Login Problems
If you can not get a login to your router, here are a few possible solutions you can try.
The Password of ZyXEL P 660 RT 1 v3s Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to ZyXEL P 660 RT 1 v3s router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s username and password are, or maybe they can reset it for you.
How to Reset the ZyXEL P 660 RT 1 v3s Router To Default Settings?
If you can’t login the setup page of router, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL P 660 RT 1 v3s Default Wifi Name (SSID)
By default, some ZyXEL P 660 RT 1 v3s routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL P 660 RT 1 v3s
MAC filtering allows you to restrict access to your ZyXEL P 660 RT 1 v3s router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL P 660 RT 1 v3s router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for ZyXEL P 660 RT 1 v3s router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.