To get access to ZyXEL PK5001Z router, you need the login IP address of your router, the username, and password.
You can find these information in ZyXEL PK5001Z router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the ZyXEL PK5001Z Router
The ZyXEL PK5001Z has a web interface for configuration. You can use any web browser to log in to the ZyXEL PK5001Z router.
Put the Internal IP Address of your ZyXEL PK5001Z in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL PK5001Z login username & password.
Default login data for ZyXEL PK5001Z
You need to know the username and password to log in to your ZyXEL PK5001Z router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL PK5001Z||192.168.0.1||Username:Printed on Routers Label/ Password:Printed on Routers Label|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL PK5001Z Login Problems
If you can not get a login to your router, here are a few possible solutions you can try.
The Password of ZyXEL PK5001Z Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to ZyXEL PK5001Z router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the ZyXEL PK5001Z Router To Default Settings?
If you still can’t get logged in, then you are probably going to reset your router to its default settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL PK5001Z Default Wifi Name (SSID)
By default, some ZyXEL PK5001Z routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL PK5001Z
MAC filtering allows you to restrict access to your ZyXEL PK5001Z router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL PK5001Z router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.0.1 on the address.
- Enter the username and password for ZyXEL PK5001Z router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.