Default Password for ZyXEL Prestige 652 Router

To get access to ZyXEL Prestige 652 router, you need the login IP address of your router, the username, and password.

You can find these information in ZyXEL Prestige 652 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.

Login to the ZyXEL Prestige 652 Router

The ZyXEL Prestige 652 has a web interface for configuration. You can use any web browser to log in to the ZyXEL Prestige 652 router.

Put the IP Address(without “http://” or “https://”) of your ZyXEL Prestige 652 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL Prestige 652 login data.

Default login data for ZyXEL Prestige 652

You need to know the username and password to log in to your ZyXEL Prestige 652 router. We listed below.

Model Ip Username & Password
ZyXEL Prestige 652 192.168.1.1 or 192.168.1.2 Username:admin/ Password:1234

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL Prestige 652 Login Problems

If you can’t get a login to your router, here are some possible solutions you can try.

The Password of ZyXEL Prestige 652 Doesn’t Work

It would help if you tried the other same brands’ passwords.

Perhaps your router’s default password is different than what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.

What if forgot password to ZyXEL Prestige 652 router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the ZyXEL Prestige 652 Router To Default Settings?

If you can not access the router’s setup page, then you have to reset your router to its default settings.

To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.

Change ZyXEL Prestige 652 Default Wifi Name (SSID)

By default, some ZyXEL Prestige 652 routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL Prestige 652

MAC filtering allows you to restrict access to your ZyXEL Prestige 652 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL Prestige 652 router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the 192.168.1.1 or 192.168.1.2 on the address.
  2. Enter the username and password for ZyXEL Prestige 652 router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.
Published

3 comments

Leave a comment

Your email address will not be published.

three + fourteen =