To get access to ZyXEL SP 660 router, you need the login IP address of your router, the username, and password.
You can find these info in ZyXEL SP 660 router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the ZyXEL SP 660 Router
The ZyXEL SP 660 has a web interface for configuration. You can use any web browser to log in to the ZyXEL SP 660 router.
Put the Login IP Address of your ZyXEL SP 660 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL SP 660 login infomation.
Default login data for ZyXEL SP 660
You need to know the username and password to log in to your ZyXEL SP 660 router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL SP 660||192.168.1.1||Username:(none)/ Password:1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL SP 660 Login Problems
If you not be able to get a login to your router, here are some possible solutions you can try.
The Password of ZyXEL SP 660 Doesn’t Work
It would be best if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to ZyXEL SP 660 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.
How to Reset the ZyXEL SP 660 Router To Default Settings?
If you still can’t get logged in, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 5 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL SP 660 Default Wifi Name (SSID)
By default, some ZyXEL SP 660 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL SP 660
MAC filtering allows you to restrict access to your ZyXEL SP 660 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL SP 660 router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for ZyXEL SP 660 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.