To get access to ZyXEL VFG6005N router, you need the login IP address of your router, the username, and password.
You can find these info in ZyXEL VFG6005N router manual. But if you lost it, then you can use the quick guide below.
Login to the ZyXEL VFG6005N Router
The ZyXEL VFG6005N has a web interface for configuration. You can use any web browser to log in to the ZyXEL VFG6005N router.
Put the IP Address(without “http://” or “https://”) of your ZyXEL VFG6005N in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL VFG6005N login infomation.
Default login data for ZyXEL VFG6005N
You need to know the username and password to log in to your ZyXEL VFG6005N router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL VFG6005N||192.168.10.1||Username:admin/ Password:1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL VFG6005N Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of ZyXEL VFG6005N Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is different than what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the back of the router.
What if forgot password to ZyXEL VFG6005N router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the ZyXEL VFG6005N Router To Default Settings?
If you can not access the router’s setup page, then you have to reset your router to its default settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL VFG6005N Default Wifi Name (SSID)
By default, some ZyXEL VFG6005N routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL VFG6005N
MAC filtering allows you to restrict access to your ZyXEL VFG6005N router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL VFG6005N router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.10.1 on the address.
- Enter the username and password for ZyXEL VFG6005N router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.