To get access to ZyXEL VMG3326-D20A router, you need the login IP address of your router, the username, and password.
You can find these data in ZyXEL VMG3326-D20A router manual. But if you do not have the manual for your router, then you can use the quick guide below.
Login to the ZyXEL VMG3326-D20A Router
The ZyXEL VMG3326-D20A has a web interface for configuration. You can use any web browser to log in to the ZyXEL VMG3326-D20A router.
Put the Login IP Address of your ZyXEL VMG3326-D20A in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL VMG3326-D20A login infomation.
Default login data for ZyXEL VMG3326-D20A
You need to know the username and password to log in to your ZyXEL VMG3326-D20A router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL VMG3326-D20A||192.168.10.1||Username:PrintedOnRouterLabel/ Password:PrintedOnRouterLabel|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL VMG3326-D20A Login Problems
If you can not get a login to your router, here are some possible solutions you can try.
The Password of ZyXEL VMG3326-D20A Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to ZyXEL VMG3326-D20A router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the ZyXEL VMG3326-D20A Router To Default Settings?
If you still can’t login the setup page of router, then you are probably going to reset your router to its factory settings.
To do this, press and hold the Reset button for 7 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL VMG3326-D20A Default Wifi Name (SSID)
By default, some ZyXEL VMG3326-D20A routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL VMG3326-D20A
MAC filtering allows you to restrict access to your ZyXEL VMG3326-D20A router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL VMG3326-D20A router. Be sure to update this information when removing devices.
How to configure:
- Open the web browser and type the 192.168.10.1 on the address.
- Enter the username and password for ZyXEL VMG3326-D20A router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.