Default Password for ZyXEL VSG1432-Telus Router

To get access to ZyXEL VSG1432-Telus router, you need the login IP address of your router, the username, and password.

You can find these info in ZyXEL VSG1432-Telus router manual. But if you do not have the manual for your router, then you can use the quick guide below.

Login to the ZyXEL VSG1432-Telus Router

The ZyXEL VSG1432-Telus has a web interface for configuration. You can use any web browser to log in to the ZyXEL VSG1432-Telus router.

Put the Internal IP Address of your ZyXEL VSG1432-Telus in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL VSG1432-Telus login data.

Default login data for ZyXEL VSG1432-Telus

You need to know the username and password to log in to your ZyXEL VSG1432-Telus router. We listed below.

Model Ip Username & Password
ZyXEL VSG1432-Telus Username:admin/ Password:telus

Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.

Other ZyXEL VSG1432-Telus Login Problems

If you can not get a login to your router, here are a few possible solutions you can try.

The Password of ZyXEL VSG1432-Telus Doesn’t Work

It would be best if you tried the other same brands’ passwords.

Perhaps your router’s default password is differs from what we have listed here.

Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.

What if forgot password to ZyXEL VSG1432-Telus router?

If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login data are, or maybe they can reset it for you.

How to Reset the ZyXEL VSG1432-Telus Router To Default Settings?

If you can’t login the setup page of router, then you are probably going to reset your router to its default settings.

To do this, press and hold the Reset button for 8 seconds. It may be an aperture or a button and will be clearly marked.

Change ZyXEL VSG1432-Telus Default Wifi Name (SSID)

By default, some ZyXEL VSG1432-Telus routers have network names (with the manufacturer name). We recommend using a personalized name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.

Configure Wireless MAC address filter for ZyXEL VSG1432-Telus

MAC filtering allows you to restrict access to your ZyXEL VSG1432-Telus router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL VSG1432-Telus router. Be sure to update this information when removing devices.

How to configure:

  1. Open the web browser and type the on the address.
  2. Enter the username and password for ZyXEL VSG1432-Telus router.
  3. Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
  4. Go to Wireless->Wireless MAC Filtering page, click the Add New button.
  5. Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
  6. The status should be Enabled and at last, click the Save button.


Leave a comment

Your email address will not be published.

5 × 4 =