To get access to ZyXEL ZyWall 1 router, you need the login IP address of your router, the username, and password.
You can find these info in ZyXEL ZyWall 1 router manual. But if you do not want to read the whole manual to find the default login information, then you can use the quick guide below.
Login to the ZyXEL ZyWall 1 Router
The ZyXEL ZyWall 1 has a web interface for configuration. You can use any web browser to log in to the ZyXEL ZyWall 1 router.
Put the IP Address(without “http://” or “https://”) of your ZyXEL ZyWall 1 in the Address Bar of your web browser. Then press the Enter key on your keyboard. You should see a dialog box pop up asking you for your ZyXEL ZyWall 1 login username & password.
Default login data for ZyXEL ZyWall 1
You need to know the username and password to log in to your ZyXEL ZyWall 1 router. We listed below.
|Model||Ip||Username & Password|
|ZyXEL ZyWall 1||192.168.1.1||Username:(none)/ Password:1234|
Note: If you are using the default settings you should change them to increase security and prevent unauthorized access to your network.
Other ZyXEL ZyWall 1 Login Problems
If you can’t get a login to your router, here are a few possible solutions you can try.
The Password of ZyXEL ZyWall 1 Doesn’t Work
It would help if you tried the other same brands’ passwords.
Perhaps your router’s default password is differs from what we have listed here.
Some Brands will set a different Complex password that is difficult to remember, and then printed on the label of the router.
What if forgot password to ZyXEL ZyWall 1 router?
If your Internet Service Provider supplied you with your router then you might want to try giving them a call, and see if they either know what your router’s login information are, or maybe they can reset it for you.
How to Reset the ZyXEL ZyWall 1 Router To Default Settings?
If you can not login the setup page of router, then you have to reset your router to its factory settings.
To do this, press and hold the Reset button for 10 seconds. It may be an aperture or a button and will be clearly marked.
Change ZyXEL ZyWall 1 Default Wifi Name (SSID)
By default, some ZyXEL ZyWall 1 routers have network names (with the manufacturer name). We recommend using a different name because a default name unnecessarily identifies your router’s brand, which makes it easier for hackers.
Configure Wireless MAC address filter for ZyXEL ZyWall 1
MAC filtering allows you to restrict access to your ZyXEL ZyWall 1 router. To enable this feature, enter the 12 digit MAC ID of each computer connected to your network into your ZyXEL ZyWall 1 router. Be sure to update this information when adding devices.
How to configure:
- Open the web browser and type the 192.168.1.1 on the address.
- Enter the username and password for ZyXEL ZyWall 1 router.
- Go to the MAC List page, you can find the MAC address of all the devices which are connected to the router.
- Go to Wireless->Wireless MAC Filtering page, click the Add New button.
- Type in the MAC address you want to allow or deny to access the router, and give a description for this item.
- The status should be Enabled and at last, click the Save button.